American National Standards Institute (ANSI). 1992. American National Standard Specifications and Dimensions for Wood Poles. ANSI 0 5:1. ANSI, New York.
American Society for Testing and Materials (ASTM). 1958. Standard Specification for Round Timber Piles. ASTM D25-58. ASTM, Philadelphia.
____. 1991. Standard Specification for Round Timber Piles. ASTM D25-91. ASTM, Philadelphia.
American Wood-Preservers' Association (AWPA). 1992. Book of Standards. American Wood-Preservers' Association, Bethesda, Maryland.
Anon.1982a. Official Log Scaling and Grading Rules. Northwest Log Rules Advisory Group, Eugene, Oregon.
____. 1982b. Supplement to Official Log Scaling and Grading Rules: A Manual for Training Log Scalers. Northwest Log Rules Advisory Group, Eugene, Oregon.
Arola, R.A. 1976. Wood FuelsHow Do They Stack Up? In Energy and the Wood Products Industry. Proceedings P-76-14, pp. 34-45. Forest Products Research Society, Madison, Wisconsin.
Avery, T.E. 1975. Natural Resources Measurements. 2nd edition. McGraw-Hill, New York.
Bell, J.F., and J.R. Dilworth. 1990. Log Scaling and Timber Cruising. Oregon State University Press, Corvallis.
Bethel, J.S. 1977. Wood for Fuel in a Tropical Forest Utilization System. Contribution 29. Institute of Forest Products, College of Forest Resources, University of Washington, Seattle.
Bjerkreim-Hansen, T. 1972. Definition of Technical and Economic Terms and Figures Used in the Logs, Wood Chips, and Pulp Trade. In Symposium on Production, Handling and Transport of Wood Chips, held in Hurdal, Norway, August 13 to September 8, pp. 30-47. Food and Agriculture Organization of the United Nations, Rome.
Briggs, D.G., and D.F. Flora. 1991. Log Scaling Procedures in Japan, Their Relationship to Her Log Sources and Influence on Trade Statistics. Working Paper 31. Center for International Trade in Forest Products, College of Forest Resources, University of Washington, Seattle.
Brown, J.K., K.A. Kendall-Snell, and D.L. Bunnell. 1977. Handbook for Predicting Slash Weight of Western Conifers. USDA Forest Service Gen. Tech. Rep. INT-37. Intermountain Forest and Range Experiment Station, Ogden, Utah.
Cochran, W.G. 1963. Sampling Techniques. 2nd edition. John Wiley and Sons, New York.
Corder, S.E., G.H. Atherton, P.E. Hyde, and R.W. Bonlie. 1970. Wood and Bark Residue Disposal in Wigwam Burners. Research Bulletin 11. Forest Research Laboratory, School of Forestry, Oregon State University, Corvallis.
Dobie, J., and D.M. Wright. 1972. Conversion Factors for the Forest Product Industry in Western Canada. Information Report VP-X-97. Department of the Environment, Canadian Forestry Service, Western Forest Products Laboratory, Vancouver, B.C.
Ellis, J.C. 1988. Procedures for the Measurement of Roundwood. Ministry of Forestry, Forest Research Institute, Private Bay, Rotorua, New Zealand.
Fahey, T.D. 1983. Product Recovery from Hemlock "Pulpwood" from Alaska. USDA Forest Service Res. Pap. PNW-303. Pacific Northwest Forest and Range Experiment Station, Portland.
____. 1987. Douglas-fir veneer: green veneer grades, layup loss, and green veneer and plywood recovery. Forest Products Journal 37(11/12):45-50.
Fahey, T.D., and S. Willits. 1991. Veneer Recovery of Douglas-fir from the Coast and Cascade Ranges of Oregon and Washington. USDA Forest Service Res. Pap. PNW-439. Pacific Northwest Forest and Range Experiment Station, Portland.
Flann, I.B. 1962. Some Conversion Factors and Related Information for Use in the Primary Forest Industry of Eastern Canada. Tech. Note 26. Department of Forestry, Forest Products Research Branch, Ottawa, Canada.
Forbes, R.D., and A.D. Meyer. 1955. Forestry Handbook. Ronald Press, New York.
Freese, F. 1973. A Collection of Log Rules. USDA Forest Service Gen. Tech. Rep. FPL 1. Forest Products Laboratory, Madison, Wisconsin.
Gholz, H.L., C.C. Grier, A.G. Campbell, and A.T. Brown. 1979. Equations for Estimating Biomass and Leaf Area of Plants in the Pacific Northwest. Research Paper 41. Forest Research Laboratory, School of Forestry, Oregon State University, Corvallis.
Giellis, J.W. 1949. The Lumbermen's Timesaver. J.W. Giellis, Dubuque, Iowa.
Hallock, H., and D.W. Lewis. 1971. Increasing Softwood Dimension Yield from Small Logs: Best Opening Face. USDA Forest Service Res. Pap. FPL 166. Forest Products Laboratory, Madison, Wisconsin.
Harris, R.A., J. W. McMinn, and F.A. Payne. 1986. Calculating and reporting changes in net heat of combustion of wood fuel. Forest Products Journal 36(6):57-60.
Harris, R.A., and D.R. Phillips. 1989. Bulk density of seven typical industrial wood fuels. Forest Products Journal 39(1):31-32.
Haygreen, J.G., and J.L. Bowyer. 1989. Forest Products and Wood Science: An Introduction. 2nd edition. Iowa State University Press, Ames.
Haynes, R.W. 1990. An Analysis of the Timber Situation in the United States: 1989-2040: A Technical Document Supporting the 1989 USDA Forest Service RPA Assessment. USDA Forest Service Gen. Tech. Rep. RM-199. Rocky Mountain Forest and Range Experiment Station, Fort Collins, Colorado.
Ince, P.J. 1979. How to Estimate Recoverable Heat Energy in Wood or Bark Fuels. USDA Forest Service Gen. Tech. Rep. FPL 29. Forest Products Laboratory, Madison, Wisconsin.
Jennings, L.G. 1965. A glossary of log and timber measures. Wood (magazine) August-December.
Koch, P. 1972. Utilization of the Southern Pines. Agriculture
Handbook 420. U.S. Government
Krier, J.P., and B.H. River. 1968. Bark Residues: A Model Study for Quantitative Determination. Bulletin 35. Montana Forestry and Conservation Experiment Station, Missoula.
Kuchimura, K., and Y. Toyama. 1989. Log Business in Japan. Forest Products Manual Series (1). Nikkan Mokuzai Shimbun-sha. Japan Lumber Reports, Tokyo.
Lunstrum, S.J. 1982. Opportunity for imported lumber recovery: a national perspective. In E. Williston, ed., Proceedings: Manufacturing Lumber from Small Logs. Contribution 44. Institute of Forest Resources, College of Forest Resources, University of Washington, Seattle.
Maloney, T.M. 1993. Modern Particleboard and Dry-Process Fiberboard Manufacturing. Miller Freeman, San Francisco.
Mann, C.N., and H.H. Lysons. 1972. A Method of Estimating Log Weights. USDA Forest Service Res. Pap. PNW-138. Pacific Northwest Forest and Range Experiment Station, Portland.
McCurdy, D.R., and M.H. Case. 1989. Tie Procurement by Class 1 Railroads in the United States, 1987. Forest Products Journal 39(11/12):79-81.
Miller, E.C., and G.E. Hansen. 1951. Spreader stoker firing of wood and coal in multiple fuel furnaces. In Forest Products Research Society Proceedings 5, pp. 195-201. Forest Products Research Society, Madison, Wisconsin.
A.M., F.A. Graybill, and D.C. Boes. 1974. Introduction to the
Theory of Statistics. 3rd edition
National Hardwood Lumber Association (NHLA). 1987. Rules for the Measurement and Inspection of Hardwood and Cypress Lumber. NHLA, Memphis, Tennessee.
Nielson, R.W., J. Dobie, and D.M. Wright. 1985. Conversion Factors of the Forest Product Industry in Western Canada. FORINTEK Canada Corp., Western Laboratory Special Publication SP-24R. Vancouver, B.C. (replaces earlier versions of the same title).
Paxson, G.S., and L.L. Spaulding. 1944. Log Scale Measurement vs. Weight as a Measure for Load Regulation. Tech. Rep. 44-4, Oregon State Highway Department.
Risbrut, C.D., and T.H. Ellis. 1981. Mill Residues. CRC Handbook of Biosolar Resources, vol. 2: Resource Materials, ed. T.A. McClure and E.S. Lipinsky. CRC Press, Boca Raton, Florida.
Saltman, D. 1991. Paper Basics: Forestry, Manufacture, Selection, Purchasing, Mathematics and Metrics, Recycling. Krieger Publishing Co., Malabar, Florida.
Scott, W.E. 1989. Properties of Paper: An Introduction. TAPPI Press, Atlanta.
Smith, J.H.G., and A. Kozak. 1967. Thickness and Percentage of Bark of the Commercial Trees of British Columbia. Faculty of Forestry, University of British Columbia, Vancouver.
____.1971. Thickness, moisture content, and specific gravity of inner and outer bark of some Pacific Northwest trees. Forest Products Journal 21(2):38-40.
Smook, G.A. 1992. Handbook for Pulp and Paper Technologists. 2nd edition. Angus Wilde Publications, Vancouver, B.C., and Bellingham, Washington.
Snellgrove, T., and T. Fahey. 1982. Scaling small logs for volume. In E. Williston, ed., Proceedings: Manufacturing Lumber from Small Logs, pp. 2-10. Contribution 44. Institute of Forest Resources, College of Forest Resources, University of Washington, Seattle.
Suchsland, O., and G.E. Woodson. 1990. Fiberboard Manufacturing Practices in the United States. USDA Forest Service Agriculture Handbook 640. U.S. Government Printing Office, Washington, D.C.
U.S. Department of Commerce (USDC). 1970. American Softwood Lumber. Voluntary Product Standard PS 20-70. National Bureau of Standards, Washington, D.C.
____.1971. Hardwood and Decorative Plywood. Voluntary Product Standard PS 51-71. National Bureau of Standards, Washington, D.C.
____.1973. Cellulosic Fiber Insulating Board. Voluntary Product Standard PS 57-73. National Bureau of Standards, Washington, D.C.
____.1974. Energy Conservation Program: Guide for Industry and Commerce. National Bureau of Standards Handbook 115. National Bureau of Standards, Washington, D.C.
____.1980. Medium Density Fiberboard for Interior Use. American National Standard ANSI A208.2-1980b. National Bureau of Standards, Washington, D.C.
____.1982a. Basic Hardboard. American National Standard ANSI/AHA A 135.4-1982. National Bureau of Standards, Washington, D.C.
____.1982b. Prefinished Hardboard Paneling. American National Standard ANSI/AHA A 135.5-1982. National Bureau of Standards, Washington, D.C.
____.1983a. Construction and Industrial Plywood. U.S. Product Standard PS 1-83. USDC, Washington, D.C.
____.1983b. Hardboard Siding. American National Standard ANSI/AHA A 136-1983. National Bureau of Standards, Washington, D.C.
____.1987. Hardwood Plywood. Current Industrial Reports Services MA-24F. Bureau of the Census, Washington, D.C.
U.S. Forest Service (USFS). 1935. (no title) Lake States Forest Experiment Station, Forest Research Digest, May.
____.1977. National Forest Log Scaling Handbook. FSH 2409.11. Amend. 5. USDA Forest Service, Washington, D.C.
____.1981. Softwood Sawmill Improvement Program: Selected Study Results (1973-1979). USDA Forest Service, State and Private Forestry, Madison, Wisconsin.
____.1987. Wood Handbook: Wood as an Engineering Material. Agriculture Handbook 72. USDA Forest Service, Forest Products Laboratory. U.S. Government Printing Office, Washington, D.C.
____.1991. National Forest Cubic Scaling Handbook. USDA Forest Service, Washington, D.C.
Waddell, K.L., D.D. Oswald, and D.S. Powell. 1989. Forest Statistics of the United States, 1987. USDA Forest Service Res. Bull. PNW-168. Pacific Northwest Research Station, Portland.
Watts, S.B. 1983. Forestry Handbook for British Columbia. 4th edition. Forestry Undergraduate Society, Faculty of Forestry, University of British Columbia, Vancouver.
Wengert, E.M. 1988. A Tutorial for Grading Hardwood Lumber. Lumber Manufacturer's Association of Virginia, Inc., Sandston.
Western Wood Products Association (WWPA). 1981. Western Lumber Grading Rules. WWPA, Portland, Oregon.
____. 1983. Gross to Net Lumber Footage Tables for Export. WWPA, Portland.
____. No date. Proposed Metric Sizes for Softwood Lumber. WWPA, Portland.
Williston, E.M. 1988. Lumber Manufacturing: The Design and Operation of Sawmills and Planer Mills. Miller Freeman Publications, San Francisco.
Willits, S., and T.D. Fahey. 1988. Lumber Recovery of Douglas-fir from the Coast and Cascade Ranges of Oregon and Washington. USDA Forest Service Res. Pap. PNW-400. Pacific Northwest Forest and Range Experiment Station, Portland.
Wilson, P.L., J.W. Funck, and R.B. Avery. 1987. Fuelwood Characteristics of Northwestern Conifers and Hardwoods. Research Bulletin 60. Forest Research Laboratory, College of Forestry, Oregon State University, Corvallis.
N.P., and M.P. Twerdal. 1950. Contents of
Young, R.A., J.N. McGovern, and R.M. Rowell. 1989. Wood for fiber, energy and chemicals. In R.A. Young and R.L. Giese, Introduction to Forest Science, pp. 478-507. John Wiley and Sons, New York.